Cable operated switch installation, Handle and cable mechanism installation – Rockwell Automation 1494U-D30_D60_D100 Universal Disconnect Switch Installation Instructions (30A, 60A, 100A) User Manual
Page 5
Advertising
PN-224754
DIR 10001182729 (Version 01)
Handle and Cable Mechanism Installation
1
Cable Operated Switch Installation
1
Install gasket.
2
Connect handle link to lever pin.
3
Install hitch pin through handle link.
TIP: Move handle to
“ON” position to help
connect handle link
to lever pin. Return
handle to “OFF”
position once
connected.
4
Verify handle is in “OFF” position.
5
Install handle nuts.
6
Install spring to handle link.
30 - 40 lb-in
8
Install defeater lever.
7 - 11 lb-in
Defeater
Lever
7
Install other end of spring to cable mechanism bracket
using needlenose pliers.
6
7
(5)
Advertising