Cable adjustment procedure – Rockwell Automation 1494U-D30_D60_D100 Universal Disconnect Switch Installation Instructions (30A, 60A, 100A) User Manual
Page 7
Advertising
(7)
PN-224754
DIR 10001182729 (Version 01)
Cable Adjustment Procedure
1
Move handle to “ON” position.
2
Remove cable pivot hitch pin and washer.
3
Push cable pivot out of handle bracket.
4
Return handle to “OFF” position.
5
(a) ADJUSTMENT PROCEDURE IF
SWITCH DOES NOT FULLY CLOSE
Unscrew cable pivot ONE full turn
counter-clockwise to extend cable.
5
6
Return handle to “ON” position and insert
cable pivot back into mechanism.
7
Re-install cable pivot washer and hitch pin.
8
Confirm switch operates properly and
repeat steps 5-7 if necessary.
(b) ADJUSTMENT PROCEDURE IF
SWITCH DOES NOT FULLY OPEN
Turn cable pivot ONE full turn
clockwise to shorten cable.
Advertising