Rockwell Automation 1609-S350NS_ES Uninterruptible Power Supply - 350VA - Manual (Page 2)

3
Installation
Installation
Mounting the UPS
This unit is designed to mount on the back panel of an enclosure. An optional Din rail mounting kit, 1609-
SDK1, is also available.
When mounting on the back panel of an enclosure, select screws that are appropriate for the weight of this unit
and the mounting surface material.
Six screws must be used when mounting this unit in an enclosure. Three screws in the top of the bracket and
three screws in the bottom of the bracket. Failure to follow these instructions may result in damage to the unit.
Top Bracket
Bottom Bracket