Rockwell Automation 1441-DYN25-MREC Time Recorder Extension Module for the Dynamix 2500 - Manual (Page 21)

Rockwell Automation Publication 1441-UM005A-EN-P - May 2011 21
Time Recorder Extension Module Chapter 2
Preview the Measurement
You can preview the measurement before you record it to validate the parameter
settings. In Preview mode, the screen continuously updates to display the
channel’s live time waveform signal and overall vibration reading.
Follow these steps to enter Preview mode.
1. From the Recorder Setup screen, press F3 (Start).
The Recorder - Taking Data screen appears.
The message area is used to display error messages, such as a clipping error,
or to prompt you to press a 1, 2, 3, or 4 to view the other time waveform
channels.
2. If you need to adjust the set-up parameters, press F1 (Back) to return to the
Setup screen.
Cursor time
Cursor amplitude
Overall reading
Preview mode
Channel you are
currently viewing
Messages