Rockwell Automation 1441-DYN25-MREC Time Recorder Extension Module for the Dynamix 2500 - Manual (Page 22)

22 Rockwell Automation Publication 1441-UM005A-EN-P - May 2011
Chapter 2 Time Recorder Extension Module
Record the Measurement
Once you have previewed the measurement and you are satisfied with the
parameter settings, you can record the measurement.
Follow these steps to review the measurement.
1. Press F2 (Rec.) on the Preview screen.
The Recorder - Taking Data screen appears.
During data recording, the live time waveform freezes on the screen, and
the (recording) time remaining counts down in the message area. If any
errors occur during the recording, an error message is displayed in the
message area.
See Recorder Status Indicators on page 20 for more information.
2. If you need to pause the recording, press F2 (Pause) on the Recorder -
Taking Data screen.
While paused, the instrument reverts back to Preview mode showing the
live time waveform. The Pause function now becomes the Resume
function.
3. Resume data recording by pressing F2 (Resume).
When the recording ends, the Recorder - Save Data screen automatically
appears, allowing you to save the recording to a file.
See Save a Time Recorder Setup and Measurement on page 23 .
TIP The recorded time signal is not displayed continuously while the
recording is paused.
Cursor amplitude
Overall reading
Preview mode
Channel you are
currently viewing
Messages
Cursor time