Rockwell Automation 1203 Serial Communications Module Series A - Manual (Page 26)

Chapter 3
Installation
3-10
Mounting the The Communications Module can be provided in three
Communications Module mounting configurations:
S Open style board, factory installed in a drive (not available for all drives)
S Open style board as a separate kit
S Enclosed style for panel mount or DIN rail mount
This section provides mounting information for the Enclosed style and the
Open style kit.
Figure 3.1
Open Style Communications Module Mounting Location (1336 PLUS 7.5–500HP)
1336 PLUS Main Control Board
TB2
TB1
L OPTION
J7
J9
Human
Interface
Module
J4
Open Communication
Module Mounts Here Memory
Module
U44
J3
U50 U54 U56
SCANport
Port 6
AB0404C
Mounting Screws
& Standoffs Qty 4