Rockwell Automation 1203 Serial Communications Module Series A - Manual (Page 33)

Chapter 3
Installation
3-17
1336 PLUS and 1336 FORCE
Refer to the product manual for connection information. On larger
horsepower 1336 PLUS and FORCE drives with an open Communications
Module mounted in the drive, no separate SCANport cable connection is
required.
SMP 3
An Allen-Bradley SCANport cable is used to make the connection between
the Communications Module and an SMP3.
Figure 3.10
SCANport Connection on Communications Module
Enclosed
Communications Module
AB0408B
SMP 3
SMP3
Connection