Restarting the touch screen interface – Rockwell Automation 1608M MegaDySC User Manual, 800 - 2400 A User Manual
Page 34
Advertising
34
Rockwell Automation Publication 1608M-UM002A-EN-P - September 2013
Chapter 6
Display Screen
Restarting the Touch Screen
Interface
If the touch screen interface becomes unresponsive, it can be reset by one of the
following methods:
Soft Reset:
Press and hold the bottom-right corner of the screen for 5 seconds to
reinitialize the touch screen interface. While you are holding this corner, you will
see “gui restart” and a timer counting down in the status bar.
Hard Reset:
Press the blue pushbutton to the left of the touch screen to force the
touch panel hardware to reboot. Upon reboot, the touch screen interface will be
redisplayed.
Advertising