Rockwell Automation 1609 Industrial Uninterruptible Power Supply - Series D - Manual (Page 8)

Service
If the UPS requires service do not return it to the dealer. Follow these steps:
1. Review the problems discussed in the troubleshooting section of the 1609 UPS User Manual to
eliminate common problems.
2. If the problem persists, contact Rockwell Automation Customer Support at 440-646-5800.
3. Pack the UPS in its original packaging.
. Pack the UPS properly to avoid damage in transit. Never use Styrofoam beads for packaging.
. Damage sustained in transit is not coverd under warranty.
Block Diagram
Display LED indicators
DIR 10000234085 (Version 01)
Copyright © 2012 Rockwell Automation, Inc. All Rights Reserved. Printed in China.
Indicator
LED
Indicator Title
On-Line The UPS is supplying utility power to the connected equipment
(see the User Manual trouble shooting section).
The UPS is compensating for a high utility voltage
(see the User Manual trouble shooting section).
The connected equipment is drawing more than the UPS power
rating allows (see the User Manual trouble shooting section).
The battery is disconnected or must be replaced
(see the User Manual trouble shooting section).
The UPS is compensating for a low utility voltage
(see the User Manual trouble shooting section).
The UPS is supplying battery power to the connected equipment.
AVR Trim
AVR Boost
On Battery
Overload
Replace Battery / Battery
Disconnected
Description
Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
ATTENTION: Always disconnect the battery(s) before shipping in compliance with U.S. Department of Transportation (DOT)
and IATA regulations. The battery(s) may remain in the UPS.
L
E
N
L
E
AC
Input
AC
Output
Backfeed
Relay
Inverter
Relay
+
-
AVR
AC to AC
AC to DC DC to DC DC to AC
Backfeed
Relay
Input
Filter
Breaker
N
Publication 1609-IN012B-EN-P - August 2012