Rockwell Automation 1732D-XXXX PointBlock 16 dc Input Module Installation Instructions - Manual (Page 11)

DeviceNet 1732 ArmorBlock 16-Point I/O, Series A 11
Publication 1732D-IN002B-EN-E - January 2013
If an I/O point is to be an output, dedicate that point as an output with a wired load and
energize it through a control program. Energized outputs show an associated active input
that can be used as a feedback mechanism to make certain that the output is on.
If an I/O point is to be an input, wire the input device as normal and leave the associated
output un-energized at all times.
I/O Self-configure Circuitry
Refer to the illustration for configuration operations.
Scan List
Connection Pin
43601
Input
Circuit
Output
Circuit
Device
Input is On (Or Output is
On)
Turn Output On