Rockwell Automation 1746-NI16V SLC 500 Analog I/O Modules - Manual (Page 8)

8 SLC 500™ Analog Input Modules
Publication 1746-IN001B-US-P
Module Installation Procedure
1. Align the circuit board of the analog input module with the card guides located at
the top and bottom of the chassis.
2. Slide the module into the chassis until both top and bottom retaining clips are
secured. Apply firm even pressure on the module to attach it to its backplane
connector. Never force the module into the slot.
3. Cover all unused slots with the Card Slot Filler, Catalog Number 1746-N2.
Module Removal Procedure
1. Press the releases at the top and bottom of the module and slide the module out
of the chassis slot.
2. Cover all unused slots with the Card Slot Filler, Catalog Number 1746-N2.
Card
Guide
Top and Bottom Module
Release(s)
@JO#VTQQE


 @JO#VTQQE


 



". 



".