Rockwell Automation 1746-NI16V SLC 500 Analog I/O Modules - Manual (Page 9)

SLC 500™ Analog Input Modules 9
Publication 1746-IN001B-US-P
Terminal Wiring
The 1746-NI16 module contains an 18-position, removable terminal block. The
terminal pin-out is shown below.
Terminal Block
Pre-wired Cables and Terminal Blocks
The following 1492 cables and terminal blocks are available to assist in wiring the
1746-NI16 module:
!
ATTENTION
Disconnect power to the SLC before attempting to install,
remove, or wire the removable terminal wiring block.
To avoid cracking the removable terminal block, alternate the
removal of the slotted terminal block release screws.
Allen-Bradley Prewired
Cables 1492-ACAB005A46, 0.5m (1.6 ft.
1492-ACAB010A46, 1.0 m (3.3 ft.)
1492-ACAB025A46, 2.5 m (8.2 ft.)
1492-ACAB050A46, 5.0 m (16.4 ft.)
Allen-Bradley User Terminal
Blocks 1492-AIFM8-3
1492-AIFM16-F-3
Channel 0
Channel 2
Channel 4
Channel 6
Analog Com
Channel 8
Channel 10
Channel 12
Channel 14
Channel 1
Channel 3
Channel 5
Channel 7
Analog Com
Channel 9
Channel 11
Channel 13
Channel 15
(Terminal Block Spare Part Catalog Number 1746-RT25G)
Terminal Block Release Screw
Maximum Torque = 0.7 to 0.9 Nm (6 to 8 in-lbs.)
@JO#VTQQE


 @JO#VTQQE


 



". 



".