Ethernet connector, D-code micro network female connector – Rockwell Automation 1732E-IR4IM12R ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input User Manual
Page 11
1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input Modules 11
Publication 1732E-IN005B-EN-E - September 2012
Micro-style M12 5-Pin Input Female Connector – 1732E-IR4IM12R
Ethernet Connector
D-Code Micro Network Female Connector
IMPORTANT
Use the 1585D–M4DC–H: Polyamide small body unshielded mating
connectors for the D-Code M12 female network connector.
Note that the distance between the center of each Ethernet connector is
16.2 mm (see Module Dimensions on page 9). Rockwell Automation
recommends the use of suitable cable based on this measurement. Some
of the recommended cables are 1585D-M4TBJM-x and 1585D-M4TBDM-x
for daisychains.
3
4
1
2
5
A
C
B
45868
(View into connector)
Pin 1
No Connect
Pin 2
A
Pin 3
B
Pin 4
C
Pin 5
No Connect
4
2
3
1
5
(View into connector 1)
Pin 1
M12_Tx+
Pin 2 M12_Rx+
Pin 3 M12_Tx-
Pin 4 M12_Rx-
Pin 5 Connector shell shield GND
44808