Rockwell Automation 1732E-IR4IM12R ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input - Manual (Page 21)

1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input Modules 21
Publication 1732E-IN005B-EN-E - September 2012
Input range RTD type Temperature

Range (°C)
Voltage Range
100
 Pt 385
0…390.48

-200…850 °C 0…156.25 mV
200
 Pt 385
0…781

-200…850 °C 0…312.5 mV
100
 Pt 3916
0…337.03

-200…630 °C 0…156.25 mV
200
 Pt 3916
0…674.06

-200…630 °C 0…312.5 mV
10
 Cu 427
0…19.116

-320…500 °C 0…19.53 mV
120
 Ni 672
0…445.10

-70…445 °C 0…156.25 mV
100
 Ni 618
0…198.88

-60…180 °C 0…78.125 mV
120
 Ni 618
0…238.65

-90…140 °C 0…78.125mV
Accuracy 0.1% Full Scale @ 25 °C (77 °F)
Accuracy drift with
temperature 30 ppm % Full Scale /°C @ 25 °C (77 °F)
Calibration Factory calibrated. Calibration is also supported through RSLogix 5000.
Sample Rate
Filters
(1)
50 Hz

60 Hz

250 Hz

500 Hz
Common Mode
Rejection Ratio 120 dB @ 50/60 Hz
Normal Mode
Rejection Ratio 100 dB @ 50/60 Hz
(1)
Sample rate filter selectable on a module basis only.
Input Specifications – 1732E-IR4IM12R
Attributes Value