Rockwell Automation 1732E-IR4IM12R ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input - Manual (Page 17)

1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD Input Modules 17
Publication 1732E-IN005B-EN-E - September 2012
Specifications
I/O status Off The input channel is inactive, can be calibrated.
Flashing Green Channel is calibrating.
Green Normal operation, inputs being scanned.
Flashing Yellow Thermistor fault.
Flashing Red Fault. Overrange, underrange, or process alarm is present.
Red No power is detected.
IMPORTANT The Module Status LED indicator will flash red and green for a maximum
30 s while the module completes its POST (Power-On Self Test).
General Specifications
Attributes Value
Voltage, power, max 30V DC
Voltage, power, min 12V DC
Module power 12…30V DC @ 300 mA
Power consumption 3 W @ 24V DC, typical

3.5 W, max (module unloaded)
Isolation voltage 50V (continuous), Basic Insulation Type

Type tested @ 707V DC for 60 s
Communication rate EtherNet/IP

10/100 Mbps

Full or half-duplex

100 meter per segment
Indicator Status for the Modules
Indicator Status Description