Rockwell Automation 1762-OV32T MicroLogix Solid State 24V DC Sink Output - Manual (Page 8)

8 MicroLogix 1762-OV32T Solid State 24V DC Sink Output Module
Publication 1762-IN021B-EN-P - July 2013
Mount the Module
General Considerations
Most applications require installation in an industrial enclosure to reduce the effects of electrical
interference and environmental exposure. Locate your controller as far as possible from power
lines, load lines, and other sources of electrical noise such as hard-contact switches, relays, and ac
motor drives. For more information on proper grounding guidelines, see the Industrial
Automation Wiring and Grounding Guidelines, publication
1770-4.1 .
Mounting Dimensions
ATTENTION
This product is intended to be mounted to a well-grounded mounting surface
such as a metal panel. Additional grounding connections from the power
supply's mounting tabs or DIN rail (if used) are not required unless the mounting
surface cannot be grounded. Refer to Industrial Automation Wiring and
Grounding Guidelines, Allen-Bradley publication
1770-4.1 , for additional
information.
44912
Measurements do not include mounting feet or DIN rail latches.
90 mm
(3.5 in.)
87 mm
(3.43 in.)
40.4 mm (1.59 in.)