Install the i/o module, 1734-tb base – Rockwell Automation 1734-8CFG POINT I/O Module with 8 Configurable 24V DC Points IN User Manual
Page 8
Advertising
8 POINT I/O Module with 8 Configurable 24V DC Points
Publication
1734-IN038A-EN-P - October 2008
Install the I/O Module
The module can be installed before, or after base installation. Make sure the
mounting base is correctly keyed before installing the module into the
mounting base. In addition, make sure the mounting base locking screw is
positioned horizontal referenced to the base.
1734-TB Base
Be sure the DIN-rail
locking screw is in the
horizontal position.
Turn the keyswitch to align
the number with the notch.
Notch position 1 is shown.
44715
44710
Advertising