Wire the ethernet/ip adapter – Rockwell Automation 1738-AENT ArmorPoint EtherNet/IP Adapter, Series A User Manual
Page 9
Advertising
Publication 1738-IN017B-EN-E - March 2005
ArmorPoint EtherNet/IP Adapter, Series A 9
Wire the
EtherNet/IP Adapter
Following are wiring instructions for the ArmorPoint EtherNet/IP
adapter.
1738-AENT Network Connector
1738-AENT Auxiliary Power
ATTENTION
Make sure all connectors and caps are securely
tightened to properly seal the connections against
leaks and maintain IP67 requirements.
(view into connector)
Pin 1 - Tx +
Pin 2 - Rx +
Pin 3 - Tx -
Pin 4 - Rx -
43765
Female In Connector
(view into connector)
Pin 1 - User Power +
Pin 2 - Adapter Power +
Pin 3 - Adapter Power -
Pin 4 - User Power -
43587
Male In Connector
Advertising