Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.1 Quick Start Guide - Manual (Page 10)

F ACTORY T ALK H ISTORIAN ME Q UICK S TART G UIDE
6
•
• •
1756-HIST1G
1756-HIST2G
The 1G or 2G in the part number indicates how much data storage
is associated with the FactoryTalk Historian ME Module.
Unpack the FactoryTalk Historian ME Module and insert it into the
chassis.
Refer to your FactoryTalk Historian ME Installation Instructions for
more detailed information.
Installing FactoryTalk Historian ME
Components
If you plan to use FactoryTalk Historian ME Client Tools, such as
the FactoryTalk Historian ME Rule Editor, FactoryTalk Directory,
and/or FactoryTalk Security, then these components must be
installed before you continue. If you do not plan to use FactoryTalk
Historian Client Tools, then skip to “Logging into FactoryTalk
Historian ME” on page 9.
After you have selected the platform that best suits your needs and
have installed the FactoryTalk Historian ME Module into the
chassis, you must determine the configuration environment for the
FactoryTalk Historian ME components. These components, or
FactoryTalk Historian Client Tools, can be found on the CD that
was shipped with the FactoryTalk Historian ME Module.