Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.1 Quick Start Guide - Manual (Page 29)

T RANSFERRING D ATA
25
•
• •
Historian ME Module is connected to the FactoryTalk
Historian SE server.
Assigning FT Activation Licenses to Support
the FTMS Point Source
Before adding trusts to FactoryTalk Historian SE, you must assign
activation licenses to support the FTMS point source in order to
successfully transfer data between FactoryTalk Historian ME and
FactoryTalk Historian SE. Activation licenses are assigned for
FactoryTalk Historian SE in the FactoryTalk Administration
Console (on the Client Tools CD shipped with your FactoryTalk
Historian ME module).
Time Synchronization
The FactoryTalk Historian ME and FactoryTalk Historian SE
systems must be synchronized prior to transferring data. In the
FactoryTalk Historian ME Web, click on the Advanced tab and
select Time Management from the left-hand column of the
FactoryTalk Historian ME Web. Time Synchronization options
include Controller Time, NTP Server, Historian SE and manual Set.
To set time, please see “Setting Time in FactoryTalk Historian ME”
on page 11
Transferring Data
Follow these steps to set up Data Transfer.
1. Click on Configure Historian in the top navigation bar.