Rockwell Automation 1734-OA4, Series C POINT I/O 120/220V AC Output Module Installation Instructions - Manual (Page 6)

6 POINT I/O 120/220V AC Output Module
Publication 1734-IN009E-EN-E - March 2013
Before You Begin
You can use these Series C POINT I/O™ 120/220V AC Output modules with DeviceNet
and PROFIBUS adapters. If you are using RSLogix 5000 software, version 11 or higher,
you can also use the Series C modules with ControlNet and Ethernet adapters. Use this
diagram to identify the external features of the module. Note that the wiring base assembly
consists of one of the following:
• 1734-TB or 1734-TBS POINT I/O two-piece terminal base, which includes the
1734-RTB Removable Terminal Block
• 1734-TOP or 1734-TOPS one-piece terminal base
POINT I/O 120/220V AC Output Module
Description Description
1 Module locking mechanism 6 Mounting base
2 Slide-in writable label 7 Interlocking side pieces
3 Insertable I/O module 8 Mechanical keying (orange)
4 Removable Terminal Block handle 9 DIN rail locking screw (orange)
5 Removable Terminal Block (RTB) 10 Module wiring diagram
120/220V
AC
Output
Module Status
Network Status NODE:
0
1
1
10
9
8
7
2
4
5
6
3
41820