Apply power to the switch, Status indicators – Rockwell Automation 1783-US8T Stratix 2000 Ethernet Unmanaged Switch Installation Instructions User Manual
Page 13
Stratix 2000 Ethernet Unmanaged Switch 13
Rockwell Automation Publication 1783-IN010A-EN-P - June 2013
Apply Power to the Switch
Once you apply power to the switch, if the ports are operating normally, the following
happens:
•
The port status indicators flash for a short time.
•
The PWR status indicator will be on continuously.
Status Indicators
Indicator
Status
Description
PWR
ON
Power is connected and operates normally
OFF
Power is not connected or operates abnormally.
SPEED (Yellow)
On
100 M working state (for example, 100Base-TX)
Off
10 M working state (for example, 10Base-T)
LINK/ACT (Green)
On
Network is available
Blinking
Network activity on the port
Off
No network activity on the port.
PWR
7
8
5
6
3
4
1
2
32309-M
1783-US8T
Speed Status Indicator
LINK/ACT Status Indicator
Power Status Indicator