Rockwell Automation 1738-XXXX ArmorPoint 24V dc Output Modules, Series A User Manual
Page 5
Advertising
Publication 1738-IN001C-EN-E - June 2005
ArmorPoint 24V dc Output Modules, Series A 5
Install the mounting base as follows:
1. Lay out the required points as shown above in the drilling
dimensions drawing.
2. Drill the necessary holes for #8 (M4) machine or self-tapping
screws.
3. Mount the base using #8 (M4) screws.
4. Ground the system using the ground lug connection.
The ground lug connection is also a mounting hole.
Ground lug connection
Latching mechanism
Keyswitch-
Set to position 1 for
the 1738 digital
output modules
Mounting base
43675
Advertising