Rockwell Automation 6156 Industrial 14 inch CRT Monitors - Manual (Page 22)

Industrial 14” CRT Monitors 22
Publication 6156-2.0
Display
Type CRT, Color
CRT Size 14” Diagonal
Nominal Display Area 10.0” Horizontal x 7.5” Vertical (254mm x 191mm)
Resolution 640 x 480 to 1024 x 768, autosync
Dot Pitch 0.28mm
Luminance 40 ft–Lamberts (137 cd/m 2 with full screen white flood)
Horizontal Scan Rate 30 kHz to 56 kHz
Vertical Scan Rate 40 Hz to 90 Hz
Video Bandwidth 75 MHz
Video Inputs RGB Analog, RS-343A (0.7V peak into 75 Ohms =
100% modulation)
Sync Type Separate Horizontal and Vertical Sync Control. TTL
signal levels.
Sync Polarity Horizontal – Negative or positive
Vertical – Negative or positive
Controls and Indicators Rear panel power–on LED (green), Brightness,
Contrast, Manual Degauss, Horizontal Size, Horizontal
Position, Vertical Size, Vertical Position, Raster Rotation
Electrical
Power Requirement 100–250VAC , 50–60 Hz, single phase
Power Consumption 120W maximum
Connectors
Video Input (rear panel) Female HD15, Female DB-13C3, or 4 BNC
Touchscreen port output (rear
panel AUX1) Male 9-pin D
RS-232 port (rear panel COM
for units with keypad option
only) Female 9-pin D
Keypad / Aux keyboard output
(rear panel) Male DIN 5-pin
Aux keyboard input (rear
panel for units with keypad
option only) Female DIN 5–pin
Aux keyboard input (behind
front panel door, for units with
keypad option only) Female DIN 5-pin
RS-232 port (behind front
panel door, for units with
keypad option only) Male 9-pin D
Specifications