Rockwell Automation 6189x Integrated Display Industrial Computers User Manual - Manual (Page 89)

Rockwell Automation Publication 6181P-UM003A-EN-P - May 2014 89
Chapter
6
System Troubleshooting
Chapter Objectives This chapter provides information on the following topics:
•
Hardware Monitoring
•
Troubleshooting
•
Troubleshooting Checklists
•
Diagnostics
•
Load the System Defaults
•
Clear the UEFI
•
Ship or Transport the Computer
Hardware Monitoring The built-in hardware monitor of the computer tracks the operating threshold
levels of the voltage and temperature sensors.
Follow these steps to determine whether an operating threshold has been reached.
1. Shut down the computer by using the appropriate method for the installed
operating system.
See Shut Down the Computer on page 41 for more information.
2. Apply power to the computer.
3. During POST, press F2 to access the UEFI set-up utility.
4. Click Firmware Configuration on the Main Menu screen.
5. Click Advanced from the Firmware Configuration main screen.