Rockwell Automation 1440-TB-A XM-940 Dynamic Measurement Terminal Base - Manual (Page 6)

6 XM-940 Dynamic Measurement Terminal Base
Publication GMSI10-IN020C-EN-P - October 2013
European Hazardous Location Approval
European Zone 2 Certification (The following applies when the product bears the
Ex Marking.)
This equipment is intended for use in potentially explosive atmospheres as defined by
European Union Directive 94/9/EC and has been found to comply with the Essential Health
and Safety Requirements relating to the design and construction of Category 3 equipment
intended for use in Zone 2 potentially explosive atmospheres, given in Annex II to this
Directive.
Compliance with the Essential Health and Safety Requirements has been assured by
compliance with EN 60079-0 and EN 60079-15.
ATTENTION
This equipment is not resistant to sunlight or other sources of UV radiation.