Initial setup and installation, Connecting the scanner, You can also access the – Bowe, Bell + Howell S006830 User Manual
Page 26
Advertising
26 of 142
Initial Setup and Installation
Connecting the Scanner
Turn off the power for the computer.
Plug the scanner power cord into the AC power input on the back of the scanner and connect the
other end to a power outlet.
Connect the supplied USB cable to an available USB 2.0 port on the computer and connect the
other end to the USB connector on the scanner.
• Use the supplied USB cable.
• Do not connect the scanner to a USB hub. A hub connection is not guaranteed to work.
1
2
3
AC input
USB connector
Advertising