Bowe, Bell + Howell S006830 - Manual (Page 84)

www.bbhscanners.com
84 of 142
Use the blower accessory to blow off any dirt from the double feed detector (A) and double feed
detector (B).
Close the ADF door.
• When you close the ADF door, close it securely until the door is locked. Do not slam the ADF
door.
Cleaning the Starting, Skew and Ending Sensors
Preparation: Locate the blower accessory and remove the brush from the blower.
Press the power button to the OFF position.
Pull the exit door release lever to open the exit door.
4
Double feed
detector (A)
Double feed detector (B)
5
Blower accessory
Blower
Sensor or detector
1
2
Reflector sheet for
ending sensor
Reflector sheet for
skew sensor (right)