Feeding speed – Bowe, Bell + Howell S006830 User Manual
Page 66
66 of 142
Insert one sheet of the document into the paper slot with the side to be scanned facing up.
• To scan in portrait mode, insert the sheet with the top edge going first into the paper slot.
• To scan in landscape mode, insert the sheet with the left edge going first into the paper slot.
• See also the document loading diagrams on
.
Now that your scanner has been set for Manual Mode, you can adjust the ADF feeding mode by changing
the scanner settings as described on
Feeding Speed
When scanning thin paper, badly creased paper, fragile paper, etc. use the Slow mode. This speed slows
the documents that are fed through the ADF (Automatic Document Feeder) to about one-half the speed of
Normal mode. The image quality in the Slow mode is the same as in the Normal mode.
Â
Note
At a resolution above 300 dpi, the paper is fed at the same speed as in the Normal mode even if the
Slow mode has been specified.
1. Navigate to your scanning application and select Settings.
2. Click the More button in the Settings dialog box.
3
Exit stopper
Paper slot