Rockwell Automation 1440-SPD02-01RB XM-220 Dual Speed Module - Manual (Page 11)

Rockwell Automation Publication ENMON-IN220D-EN-P - February 2014 11
XM-220 Dual Speed Module
Certifications
Isolation voltage 250V (continuous), Basic Insulation Type, relay to all other circuits.
Isolation between other circuits is not rated.
Type tested at 1500V AC for 60 s
Wiring category (1) 2 - on relay and shielded signal ports
3 - on Serial and power ports
2 - on XMbus ports
Wire type Signal connections: shielded
Power and relay connections: unshielded
Pilot duty rating Relay port: Not rated
North American temp code T4A
IEC temp code T4
(1) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 .
Certification
(1)
(when product is marked)
(1) See the Product Certification link at http://www.rockwellautomation.com for Declarations of Conformity, Certificates, and other certification details.
Description
c-CSA-us CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for US and Canada. See CSA File 150115.
CE European Union 2004/108/EC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
EN 61131-2; Programmable Controllers (Clause 11)
C-Tick Australian Radiocommunications Act, compliant with:
• AS/NZS CISPR 11; Industrial Emissions
Ex European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-11; Explosive Atmospheres, Protection "i"
• EN 60079-0; General Requirements
• II 3 G Ex nAC [ic] IIC T4X Gc
• when used at or below 60V AC or 75V DC
KC Korean Registration of Broadcasting and Communications Equipment, compliant with:
• Article 58-2 of Radio Waves Act, Clause 3
Attribute XM-220