Installing miniconfig on a pc, Running miniconfig, Installing miniconfig on a pc running miniconfig – AJA V2Analog User Manual
Page 10
V2Analog v1.0
www.aja.com
10
Installing
MiniConfig on a PC
To install the application on a Windows PC, insert the CD supplied with the Mini-
Converter into the computer, locate the “MiniInstaller” application, and then double-
click it.
Figure 4. MiniConfig Setup Wizard on PC
A Setup Wizard will guide you through the installation. Just click Next to begin.
Answer all questions in the subsequent dialogues; when done, you will be able to locate
the MiniConfig application in the AJA folder in the Programs listing.
Running MiniConfig
Connect the Mini-Converter to the PC or Mac via the supplied USB cable. Connect the
external power supply (supplied) to the Mini-Converter.
NOTE:
On a Mac, when the Mini-Converter is connected to the USB port, you may see an alert like
that shown following. If you do, press Cancel—this alert can be ignored.
Figure 5. Mac Network Message (ignore)
PC Startup:
To run MiniConfig on a PC, find the AJA MiniConfig in the program list and locate the AJA
MiniConfig application.
Figure 6. PC MiniConfig Startup