AJA V2Analog - Manual (Page 12)

V2Analog v1.0 www.aja.com 12
Figure 7. MiniConfig, Video Screen
Selecting a Mini-Converter with the dropdown menu causes this application to connect
to the selected converter. The graphic of Mini-Converter and text below it provides:
• Type of converter
• Firmware version
• Serial number of the unit
A status field at the bottom of the screen shows if your application is connected and
communicating with the Mini-Converter.
When configuring the Mini-Converter, select it from the top pulldown, view the current
settings and change any values. Changes are immediately implemented and saved to
non-volatile memory, overwriting previous settings.
Tabbed Screens
The Tabs delineate control screens with groups of controls for each type of task to be
performed. The controls for the actual configuration parameters are specific to each
Mini-Converter type. Click on any of the tab buttons and the screen below will change to
match. Each of these screens are described on the following pages.
The color “LED” near the SDI input connector indicates by color the detected signal type.
• Off indicates no input
• Green is SD-SDI
• Red is HD-SDI
Tabbed
screens
Message
showing
status
Firmware
version
and serial
number
Connectors are labeled with
the signals currently detected.
Select a USB
port and an
attached
Mini-Converter
(name in
parentheses)