Dip switch settings summary, Usb control and setup—using aja miniconfig, Installing miniconfig on a mac – AJA V2Analog User Manual
Page 9: Usb control and setup—using
V2Analog v1.0
www.aja.com
9
DIP Switch Settings
Summary
SDI input formats and the DIP switch settings for various analog output formats are
shown in
.
USB Control and Setup—Using AJA MiniConfig
The V2Analog can usually be used right out of the box for most applications since it is
designed to recognize video input formats and perform standard actions automatically
by default. However you can also manually configure the V2Analog using a supplied
software application for PCs and Macs called “MiniConfig.” This same application can be
used to update Mini-Converter firmware released by AJA.
Installing
MiniConfig on a Mac
To install the application on a Mac, insert the CD supplied with the
Mini-Converter into the computer, drag the “AJA MiniConfig”
application for your platform (Mac or PC) to your desktop or an
applications folder.
NOTE:
Macintosh computers must be Intel-based (G5, G4 and earlier models will not work with
MiniConfig).
Table 2. SDI Inputs, DIP Switch Settings, and Analog Output Formats
DIP Switch Settings
Notes
Input SDI Std
Output Analog Format
2
3
4
525i 59.94
Composite NTSC + S-Video
ON
X
ON
Composite and S-Video are
output simultaneously
525i 59.94
Composite NTSC-J + S-Video
ON
X
OFF
Composite and S-Video are
output simultaneously
525i 59.94
Component YPbPr SMPTE/EBU-N10
OFF
X
OFF
525i 59.94
Component YPbPr Betacam
OFF
X
ON
525i 59.94
Component YPbPr Betacam-J
-
-
-
Only selectable via MiniConfig
625i 50
Composite PAL + S-Video
ON
X
X
Composite and S-Video are
output simultaneously
625i 50
Component YPbPr SMPTE/EBU-N10
OFF
OFF
X
720p *
Component YPbPr SMPTE/EBU-N10
X
OFF
X
720p *
Component RGB
X
ON
X
1080i/p/psf *
Component YPbPr SMPTE/EBU-N10
X
OFF
X
1080i/p/psf *
Component RGB
X
ON
X
* = all supported frame rates
Note: X = don't care