Bally Refrigerated Boxes Mortuary Cooler Systems User Manual
Page 6
REV: 6/2014
IM-418-11 © 2014 Bally Refrigerated Boxes, Inc.
6
Figure 12:
View of raised tray
assembly on
temporary supports.
Installing the Telescoping Body Tray Assembly
1. With the back and two sidewalls erected and fastened together, place the
telescoping tray assembly into the partially constructed box. See Figure 11.
Insure that the ends of each cross brace are inserted into the vertical
struts. See Figure11a.
2. Raise and suspend the assembly to the desired height with temporary
supports. See Figure12.
3. At this time, securely fasten the cross braces to the supports struts with the
furnished clamps. See Figure 13.
Figure 11a:
Assembly tray inserted
into the vertical struts.
Figure 11:
Telescoping tray
inserted at a 45°
angle.
Proper order in which the clamps should be attached.
Figure 13:
Cross braces attached to
struts with clamps.
See Figure 9 on pg 5.