Bang & Olufsen BeoVision Avant (No tuner) - User Guide - Manual (Page 18)

18
>> Connections
To operate non-Bang & Olufsen products
with a BeoRemote One or the BeoRemote
App, attach a Bang & Olufsen IR-transmitter
on your non-Bang & Olufsen product and
then connect it to one of the sockets
marked PUC on the connection panel.
Attach the transmitter near the IR-receiver
on the connected equipment to ensure
remote control operation. Before attaching
the transmitter permanently, check that you
can operate the equipment menus on the
television screen using BeoRemote One or
BeoRemote App.
When you set up the transmitter to a
selected PUC socket in the SOURCE LIST
menu, settings for the IR-transmitter are
made automatically. However, it is possible
to perform a manual setup of the socket if
alternative settings are required.
For an extra PUC cable, contact your Bang &
Olufsen retailer.
For information about download of
Peripheral Unit Controller (PUC) tables for
set-top boxes,
see page 21 .
IR-transmitters