Bang & Olufsen BeoVision Avant (No tuner) - User Guide - Manual (Page 37)

37
See two sources at the same time
Your BeoRemote One gives you
access to a DUAL PICTURE
function for viewing an HDMI
source (for example a set-top
box or Blu-ray player) and a
WebMedia or HomeMedia source
at the same time.
There are some limitations when using the
DUAL PICTURE function since some
source combinations may not be possible.
For example, you cannot watch two HDMI
sources at the same time. When an invalid
combination is selected, an on-screen
message appears on the television screen.
When using DUAL PICTURE, you cannot
show a source with UHD signal.
If you watch 3D and switch on the DUAL
PICTURE function, the television will
switch to 2D.
Volume adjustment always affects picture A,
while other operations, such as selecting
channels, affect picture B. Selecting a new
source cancels DUAL PICTURE viewing.
While watching, for example, a
television channel …
Press to bring up DUAL
PICTURE
Bring up a source list and select
the source, for example
HOMEMEDIA, to view on the
right side of the screen (B)
Press to swap the left picture
and right picture
To leave the DUAL PICTURE function …
To leave the function and return to normal
viewing of the source on the left side of the
screen (A) simply press TV.
A B
A B
LIST
DUAL PICTURE
HOMEMEDIA
MENU
0