Bang & Olufsen BeoVision Avant (No tuner) - User Guide - Manual (Page 34)

34
Set up 3D television
You can select if the television should
activate 3D mode automatically, manually
or by prompt, when it detects 3D signalling
the first time after source or channel
change. The default setting is PROMPT.
To activate 3D, bring up the ACTIVATE 3D
menu and follow on-screen instructions.
When 3D signalling is available, and
ACTIVATE 3D is set to AUTO, the television
switches to 3D mode automatically. If it is set
to PROMPT, you must select between VIEW
IN 3D and VIEW IN 2D. If it is set to MANUAL,
you must enter the menu and switch to 3D
mode manually.
You can set up preferences for
watching 3D television. Select if
the television should switch to 3D
mode automatically, when
automatic 3D signalling is
available.
Activate 3D and adjust settings
MENU
SETUP
PICTURE
3D DISPLAY
3D SETTINGS
ACTIVATE 3D