Bang & Olufsen BeoVision Avant (No tuner) - User Guide - Manual (Page 51)

51
Network settings
You can set up your television to
a network either with a wired or
wireless connection. For the most
reliable network connection,
Bang & Olufsen recommends
making a wired connection.
Bang & Olufsen also
recommends that you use a
separate router and access point
– a Network Link router – to
ensure the most reliable
playback of digital files.
For more information about
Bang & Olufsen network setup,
contact your Bang & Olufsen
retailer.
On some markets, it is not possible to
set up a wireless connection, and you
must use a wired connection.
Make a wired connection
Connect one end of the Ethernet cable to
the router and the other end to the Ethernet
socket ( ) on the television. It is assumed
that you have enabled the DHCP service on
your network. If LAN settings are set to
configure automatically, IP address, subnet
mask, gateway and DNS server are assigned
automatically.
If the settings are set to configure manually,
or if the IP address, subnet mask, gateway
and DNS server, for some reason, are not
assigned automatically, you must enter this
information manually. > Highlight LAN SETTINGS and press the
centre button.
> Press the green button to be able to name
the LAN connection.* 1
> Press the centre button to store the name
and return to the LAN SETTINGS menu.
> Press to highlight CONFIGURATION.
> Press or to select MANUAL or
AUTOMATIC configuration.
> Press the centre button to store the
setting.
If you have selected MANUAL configuration,
you must enter a value for the IP ADDRESS,
SUBNET MASK, GATEWAY, and DNS. Press
the centre button to store the settings.
1 *You can only use latin characters for naming
the LAN connection.
INTERNET
ISP
ROUTER
NAS
INTERNET
ISP
ROUTER
B&O
RECOMMENDED
ROUTER
NAS
MENU
SETUP
NETWORK
NETWORK SETTINGS
Example of recommended network setup
either wired or wireless. Example of simple setup either wired or
wireless.