Bang & Olufsen BeoCenter AV5 - User Guide - Manual (Page 12)

> Auto tuning – Satellite
12
Auto tuning of Satellite equipped with
motorised dish…
If your Outdoor Unit arrangement for Satellite
reception includes a motorised dish and an
external positioner, you must direct the
position of the dish to the Satellites you want
to auto tune stations from.
Once the external positioner is connected to
your BeoCenter AV5, start the tuning process
using the Beo4:
• Press SAT, then MENU, and now press GO to
call up the SAT SETUP menu
• Press ▼ until MANUAL TUNING is lit up,
then press GO to call up the menu
• Then tune in to a frequency of an
appropriate station transmitted by the
Satellite you are trying to tune in from
• Press ▼ until POSITION is lit up and adjust
with ss or tt as required.
• Now press STOP to leave the SAT MANUAL
TUNING menu
• Then press ▲ until AUTO TUNING is lit up
and press GO to call up the SAT AUTO
TUNING menu and press
tt to start auto
tuning stations
Repeat the procedure for the stations which
are tuned in from other Satellites and adjust
the position of the dish as appropriate.
However, in order to keep the stations you
have tuned in already, and just auto tune the
new Satellite stations, you must call up the
item UPDATE TUNING instead of AUTO
TUNING, see page 22 for further information
about the update tuning function.