Bang & Olufsen BeoCenter AV5 - User Guide - Manual (Page 35)

35
Making video tape recordings via Teletext
If you connect a BeoCord V 8000 video-
tape recorder to your BeoCenter AV5,
you can make Timer recordings directly
via the Teletext page listing TV (or
Satellite) programmes.
You can programme several Timer
recordings at the same time. Yet the
actual programming procedure varies,
depending on whether the PDC/VPS*
facility in the videotape recorder is
activated or not, and whether the
programme you wish to record is
broadcast with PDC/VPS* signals.
For further information about Timer
recording, please refer to the
Videotape recorder’s own User’s
guide…
*Note: For further information about the PDC/VPS
facility in connection with Timer recording via
Teletext, see the following page.
A Teletext page listing TV programmes with the
Timer recording facility activated
You have now selected a programme for
recording and the Timer recording menu is
available for you to check and confirm your
recording.
Press to call up Teletext
Call up the Teletext page listing
TV (or SAT) programmes…
Press to access the Timer recording
function
The start of the first programme is
highlighted
Press to move the cursor and select
the start time of the programme you
want to record
Alternatively, press tt or ss to move the cursor
Press to accept the start time
Check the stop time…
Press to accept the stop time
The Timer recording menu appears
over the page:
22:00 - 23:00 30.JAN P10 BBC OK ?
If the data is not correct, use tt or ss to move
and the number keys or ▲ or ▼ to enter the
correct data…
(Press STOP to cancel the function without storing
any information)
Press to store the Timer recording
The relevant start and stop times of your
recording/s and the indication RECORD
are displayed above the page
Continue to select programmes for
Timer recording…
Or
Press to leave Teletext
TEXT
EXIT
then
RECORD
then
then
GO
then
GO
then
GO
or