Bang & Olufsen BeoCenter AV5 - User Guide - Manual (Page 17)

17
Select ON/AV for most coded stations, in order to
get both sound and pictures. If only the video
signal is coded, select ON/V. If you select ON/AV
where only the video signal is coded, the sound
may be lost when the signal is decoded.
Note: If an extra decoder is connected to the AV
socket and DECODER-2 is registered in the AV
socket menu (see the Setting-up guide for further
information), select 1/V or 1/AV for Decoder
number 1; 2/V, 2/AV for Decoder number 2; or OFF
for no decoder.
SOUND (mono/stereo/language)
The following types of sound may be available:
MONO…
FM/NICAM mono sound
STEREO… NICAM/ A2 stereo sound
MONO1… Mono language 1
MONO2… Mono language 2
MONO3… Mono language 3
STEREO2… Stereo language 2
Note: MONO3 and STEREO2 are only available, if
a NICAM stereo system decoder is built into your
BeoCenter AV5.
Even though you store your preferred type of
sound/language in this way, you may still switch
between the various types of sound while you are
watching this TV station. See page 44, Switching
sound, for further instruction.
What’s on the TV MANUAL TUNING menu…
FREQUENCY
Indicates the TV frequency.
PROGRAM
Program number – 79 program numbers are
available.
ID (Name)
Naming stations – ‘write’ a name by revealing the
individual characters for each character space – 8
characters spaces are available. When you reveal
the first characters, an appropriate preset name
may appear. If no preset name is available – then
continue to ‘write’ the name character by
character.
What’s on the second TV MANUAL TUNING
menu…
FINE
Fine tuning – usually the TV tunes to the best
possible picture, however, neighbouring channels
may blur the picture slightly. Fine tune within a
range of +8 – -8.
DECODER
A decoder can be connected to the reception of
coded TV stations. If DECODER is set to one of the
ON options, the decoder will be cut in
automatically when the relevant program number
is selected.
The following options are available for DECODER:
ON/AV… (decoder on) where both audio and
video signals are coded
ON/V… (decoder on) where only video signals are
coded
OFF… (decoder off) for no decoder
To name a station…
Press to move to ID
Press the Green button to start
naming
Press to reveal the first character
in a name
Press to move to the next character
spaces
Press ▲ or ▼ to reveal the second character or a
preset name – if no name is available, move to the
next character space, and reveal the appropriate
characters…
Press to store your station and,
if you wish, continue tuning
To fine tune, make decoder or sound
selections for your station…
Press repeatedly to call up to
the second manual tuning menu
The second TV MANUAL TUNING
menu appears…
Use ▼ or ▲ to move to the other items, and
press ss or tt to reveal options for an item…
Press to store and return to the first
tuning menu
Press to store your station
Continue to tune in stations…
Or
Press to remove the menus from
screen
or
·
or
tt
GO
GO
GO
then
EXIT