Bang & Olufsen BeoSystem 1 - User Guide - Manual (Page 20)

20
Set-top box operation
The built-in Set-top Box Controller
acts as an interpreter between the
set-top box of your choice and the
Beo4 remote control. When a set-top
box is connected, you can use the
Beo4 remote control to gain access
to the programmes and functions
offered by the set-top box.
For further information about how to
connect and register a set-top box,
refer to the chapter ‘Connect
additional equipment’ on page 44
and the chapter ‘Register and use
additional video equipment’ on page
32.
Universal Beo4 operation
If you know which Beo4 button activates the
function you want, you can bring up the
function without activating the Set-top Box
Controller menu first.
While your set-top box is
activated…
Press GO and then the number
button that activates the
function you want
Press GO and then m or p to
step up or down through
programs directly
Press and hold GO to bring up
the Program guide or the ‘Now/
Next’ banner on the screen
depending on your set-top box
Use the set-top box’s own menu
Once you have activated your set-top box,
you can operate the set-top box’s own
menus, such as the Program Guide, via Beo4.
While the set-top box’s own
menu is shown…
Moves the cursor up or down
Moves the cursor
Selects and activates a function
Press GO and then l or n to
step between menu pages or
step in program lists
Exits menus, or returns to a
previous menu
Exits menus, enters or exits
different modes, such as radio
Use the coloured buttons as
indicated in the menus of your
set-top box
When set-top box is selected as
source, press MENU twice to
bring up the BeoSystem 1 main
menu.
m
p
l n
GO
GO
GO
l n
STOP
EXIT
GO
0 – 9
GO
m
p
GO