Bang & Olufsen BeoSystem 1 - User Guide - Manual (Page 35)

35
To change volume, bass, treble or loudness…
> Press MENU to bring up the main menu.
> Press 3 to bring up the Setup menu.
> Press 2 to bring up the Sound* menu.
> Press GO to bring up the Adjustment menu.
> Press l or n to move between menu items.
> Press m or p to adjust the settings for each
item.
> Press EXIT to store your settings until you
switch off BeoSystem 1, or…
> …press GO to store your settings permanently.
The content of the ‘Sound’ menu depends on how
many speakers are connected to BeoSystem 1.
Change volume, bass, treble or
loudness
You can adjust sound volume, select a
speaker combination or adjust the speaker
balance directly on Beo4 at any time without
bringing up a menu, but you must bring up
the Sound menu in order to be able to adjust
bass, treble or loudness.
Setup
1 Tuning
2 Sound
3 Picture
4 Connections
5 Menu
6 Clock
Sound
1 Adjustment
2 Speaker type
3 Speaker distance
4 Speaker level
5 Sound system
Counter Tape Speed PDC&VPS Marker
Time used 240 SP On On
Volume Bass Treble Loudness
32 0 0 On
*NOTE! The Sound menu lets you calibrate your
surround sound speaker setup permanently. For
further information, refer to the chapter
‘Loudspeaker connections – surround sound’ on
page 4 in the Reference book.