Bang & Olufsen BeoVision MX_8000 - User Guide - Manual (Page 30)

30
Looking after BeoVision MX 8000
Normal maintenance, such as
cleaning the BeoVision MX 8000, is
the responsibility of the user. To
achieve the best result, follow the
instructions included.
Cleaning BeoVision MX 8000
Regarding surfaces…
Wipe dust off the surfaces using a dry, soft
cloth. If necessary, remove grease stains or
persistent dirt with a lint-free firmly wrung
cloth, dipped in a solution of water
containing only a few drops of mild
detergent, such as washing-up liquid.
About the contrast screen…
If your BeoVision MX 8000 is equipped with a
contrast screen with anti-reflection coating,
you must use a mild window cleaning fluid to
clean the screen. To retain the optimum
performance of the screen, make sure that no
streaks or traces of the cleaning fluid are left
on the screen.
NOTE! If the front screen glass should crack or
chip, or if it should be damaged in any other way,
it must be replaced immediately as it could
otherwise cause bodily harm. Contact your Bang &
Olufsen retailer.