Bang & Olufsen BeoPlayer - User Guide - Manual (Page 35)

35
Settings for N.MUSIC
Before you copy, or ‘rip,’ your audio CDs for storage on your
computer, it is a good idea to adjust how you would like
copying to occur.
Copying quality
Choose the quality you want for your copied music. You can
set the quality for two different copying destinations: your
hard drive or a portable device.
> On the BeoPlayer bar, click SETUP.
> Click CONFIG.
> Click the tab ‘CD Copying’.
The quality of the copy increases with the bit rate (kbps)– the
amount of data per second – but the size of the file increases
at the same time. This means high quality tracks will fill up your
hard disk faster.
Copy to BeoMaster 5
> Check the box ‘Copy to BeoMaster 5’.
All your N.MUSIC tracks will be copied to BeoMaster 5.
File location
(If you do not have a BeoMaster 5 in your setup)
> Choose where to store the copied track or tracks on your
computer.
> Click ‘Browse’ to look through your drives and folders.
> Click OK when done, or …
> … click ‘Cancel’ to return to the ‘Standard’ tab.
Licenses
The ‘Licenses’ tab contains information about usage licenses for
CDs. It is a good idea to make a backup of your licenses. If you
wish to e.g. install a new operating system on your computer,
you will need to save a copy of the licenses on a disk or on a
network drive. The licenses can be restored when installation
of the system is complete.
DRM protection
The ‘Use DRM protection’ option protects your music from
being moved onto other drives or portable devices.
Note that the option ‘Use DRM protection’ is not enabled by
default. BeoPlayer/BeoPort is not able to transfer DRM
protected files. Therefore, we recommend that you do not alter
Configuration of BeoPlayer