Bang & Olufsen BeoPlayer - User Guide - Manual (Page 44)

44
If the frequency is not found automatically …
Follow the instructions on the computer screen, which will
guide you through to find the link frequency manually.
How to make video system settings …
> Click CONFIG located under SETUP in the control bar.
> Select the tab ‘Advanced’.
> Click the ‘Manual’ check box in the section ‘Link frequency’.
> Click ‘Find’.
> Follow the instructions on the screen.
Once you have initiated a search by pressing ‘OK’, you can
change the video system.
Video system settings …
Before you can watch television on your computer screen,
you must make sure that you have made the correct country
and video system settings. Some areas and countries, such as
France, use a SECAM television system.
If you live in such an area, you may have to make video system
adjustments when using a link room product. If you want to
watch certain set-top box channels or videotapes using the
PAL system, you must change the ‘Video system’ setting in the
‘Configuration’ menu to PAL.
Contact your retailer for information about available TV tuner
cards and their handling of the PAL and SECAM systems.
> Select ‘PAL’ instead of ‘SECAM’ to change video system.
Find the ‘Video system’ setting under ‘Tune’ tab.