Bang & Olufsen BeoCom 2 - User Guide - Manual (Page 26)

Preference settings
The Settings menu contains several options
which allow you to adjust BeoCom 2
functions.
To choose settings in the menu …
> Press
OK to bring up the main menu.
> Push the Track point down to display Settings
and press OK to bring up the menu.
> Push the Track point down until the desired
option is displayed, such as Time and date.
> Press OK to bring up the menu.
> Push the Track point up or down to select a
setting and press OK to store it.
The Settings menu options
Ringer …This menu contains two separate ringer
settings:
– Ringer on/off lets you switch the ringer on or
off, and set a time period in which the phone
will not ring. If you switch off the ringer, the
phone does not ring, but it does register
incoming calls in the Caller ID list. The ringer is
disconnected until you change the setting.
– Ringer level lets you set the ringer volume.
Options are Low, Medium or High. The ringing
signal selected is played after a moment.
Time and date …Enter the time and date.
News indicator …The news indication – the
display message indicating new, unanswered calls
– is set to On from the factory, so you can see
how many new calls you have received. Options
are On and Off.
Handset …The Handset menu contains three
sub-menus:
– Enter name allows you to give the handset a
new name using the Track point and OK key.
Note that this menu is called Change name
after you enter a name for the handset the first
time.
– Register allows you to register the handset to
the BeoLine base.
– Handset type allows you to set the handset to
be Personal or Common, as described on page
31.
Base …The Base menu contains three sub-menus:
– Remove handset cancels registration of the
handset to the base.
Living Room
16:35
Time and date
12:00 1 Jan
Stored
16:23 9 Jan
Settings
OK
OK
OK
Set year
2005?
OK
OK
Set month
Jan?
...
Set day
1?
26