Bang & Olufsen BeoCom 2 - User Guide - Manual (Page 4)

Make and answer calls
The key on the BeoCom 2 is used to start
and end a call. During the call, the phone
displays the duration of the call and the
number or name of the person called. If you
do not wish to answer a call, you can mute
the ringing signal.
To make a call …
> Enter the telephone number using the digit
keys.
> To correct a digit, push the Track point left or
right to move the cursor to the right of the digit
in question and press
C to delete it.
> Press to make the call. The call time is shown,
and if the name is stored in the Phonebook, this
is shown as well.
> Press to end the call. Alternatively, place the
handset in the charger.
To answer a call …
> Press to answer the call.
> Press to end a call. Alternatively, place the
handset in the charger.
To mute a handset’s ringing …
> Press
C to mute the ringing signal for the
incoming call.
If you end a call to or from a number not
previously stored in the Phonebook, the display
prompts you to do so. Refer to Store a number
after a call on page 7 for more information.
To get a dial tone before entering the number,
press .
0--9
C
23456689
0--9
23456789
23456
23456789
0:12
4