Bang & Olufsen BeoCom 2 - User Guide - Manual (Page 29)

System use with several handsets
With several handsets registered to one base,
you can make your own phone system. The
handsets can all receive external calls, also
during internal calls between handsets.
Handsets in the system are numbered 1–8*
and can be named as well.
Each handset is initially set up as ‘common’.
This means that the Phonebook, Caller ID list
and Redial list are all updated by the base
and shared with other handsets in the
system. If you want an independent
Phonebook, Caller ID list and Redial list in an
individual handset, make the handset
‘personal’ instead.
For further information about the
possibilities a system setup offers, please
refer to the following pages.
*If you use a BeoCom 6000 base, a BeoLine PSTN
base or a BeoLine ISDN base, you can only register
six handsets.
29