Bang & Olufsen BeoCom 2 - User Guide - Manual (Page 28)

Dialling systems
You can set up the telephone to dial using
the Pulse dialling and Tone dialling (DTMF)
systems. Change the setting if you want to be
able to call home banking services or
extension numbers. The available settings
are described below. BeoLine is preset to
mode 1.
– Predial … Enter the phone number and press
to make a call.
– Postdial … Press , await a dial tone and enter
the phone number to make a call. Postdial is
used with predial when you call a home
banking service or an extension number.
Mode 1
Predial is set to Pulse and postdial to Tone
(DTMF). If your network uses Pulse and you want
to call a home banking number, use this setting.
> Press
781 1 .
> Press and await a dial tone.
> Press to store the setting.
Mode 2
In mode 2 both predial and postdial are set to
Pulse. If you do not use calling home banking
services, leave your phone in mode 2.
> Press
781 2 .
> Press and await a dial tone.
> Press to store the setting.
Mode 3
In mode 3 both predial and postdial are set to
Tone (DTMF).
> Press
781 3 .
> Press and await a dial tone.
> Press to store the setting.
NOTE! The information
on this page only
applies to the
Russian market!
The keys and can
be used only when
using the Tone (DTMF)
dialling system.
For further information
about the dialling
systems, contact
your telephone
company.
28